Use case, you need to access a specific network through a specific router.

can connect to internet using the router located at 192.168.8.1.

Enter a valid DNS server/relay (you can use google ones : 8.8.8.8).

Click on + of the WAN connections block.

You can change that if your network setup needs a static setup (IP, mask and gateway). To setup a static IP on your computer (Windows and Mac OSX), you can follow this guide WAN setup īy default, all our devices will connect to internet using DHCP. This way your computer can easily access your RCP web UI. It is interesting to setup a static IP on your RCP and computer.

this IP is marked as persist, this will stay even if you reset your config or upgrade the OS with a SWU.

in particular from your computer (which has the IP 172.16.0.114).

You need to access the RCP web UI from the corporate network (not the factory IP of the RCP).

Click on + of the LAN connections block.

In the Configuration tab, click on IP Connections:

You don't want to change your camera/router IP.

They need to communicate with each other.

You have a RCP and an IP camera or an IP router.

requires a DHCP supporting mDNS (multicast DNS).

y and Subnet Mask= 255.255.0.0 (or /16) where x, y are the two last numbers of the serial number. The default IP and Subnet Mask of the Cyanview devices has the following pattern: IP= 10.192. There are several ways to find your device's Network IP. Cyanview devices communication relies on IP Network.

Mask my ip serial number